I took my FZ6 in for its 600 mile service and they did their stuff including synchronizing the throttle bodies. Since then it runs a lot smoother and starts better than it used to. My question is, does anyone know how to do this in case I want to do it myself later.
Synchronizing the throttle bodies
Join the discussion
Recommended Reading
-
09 fz6 no power to dash clusters or starter
FZ6/FZ6RHey guys I need help first year with the bike. kept the battery in over winter and it was dead so I decided to give it a jumpstart apparently the battery was dead enough where I wasn’t able to fire up so I took off the battery to charge it...When I put the battery back in I have no power to...- 1
- 178
-
Caution on using a torque wrench on the oil drain plug
FZ6/FZ6RSome caution about tightening the oil drain plug. I’ve been changing oil in my cars for almost 30 years, so I know what I’m doing. The dealer put the plug on very tight the first time. I figured they must have used a torque wrench. So just for the heck of it, I’ve never used one before, I...- 20
- 37K
-
BlueZ6 · updated
-
anyone clocked their 0 - 60mph times?
FZ6/FZ6Ri read the spec sheet the fz6 can go 0 - 60 in like 4 secs. anyone actually got that? i still cant believe a sub $10k bike, 600cc can beat / match a $100k+ supercar in straight accel. i know the bike is lighter but still...- 43
- 19K
-
Fork Seal Retainer Ring Removal - Help!
FZ6/FZ6RFirst time doing my fork seals and I’ve watched a ton of vids showing the removal of the seal retainer rings but it seems that my seal has ridden up along side the ring. It seems that all the pics I see of the ring shows it clearly above the seal however I have to dig into the seal and I can’t...- 3
- 310
-
So what weight oil fork oil you using?
FZ6/FZ6RSince I am thinking about changing to a heavier oil I thought I'd poll it up and get some opinions. Notice a difference(if using a different weight)? Also how hard is it to replace the fork seals?- 15
- 10K
-
phxtravis · updated
Join now to ask and comment!