Sport Bikes banner
1 - 2 of 2 Posts

· Registered
Joined
·
268 Posts
Discussion Starter · #1 ·
Well, the time came to finally take apart the EX and play with it a little bit. After removing the seat, tank, fairings, etc I started to remove the battery. I noticed one of the bolts holding it on had already broken (leaving the threaded part still inside). Luckily part of the screws are hanging down below and I managed to use a pair of pliers and "screw" one out. The other isn't working so well, I seem to just be stripping the thread on the bottom. Can anyone help me with this, or is there a special tool designed for this? Thanks.

Nick
 

· Registered
Joined
·
268 Posts
Discussion Starter · #6 ·
Thanks for all the responses guys. I bought some lubricant and bolt extracting stuff earlier today, but haven't tried it yet (110* or so in the garage, ouch). I'll find some vice-grips and try that first, all three of these bolts are attached to the frame so I've got to get them out somehow. Thanks again for the advice.

nick
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top