Sport Bikes banner
1 - 2 of 2 Posts

· Registered
27 Posts
all you have to do is loosen the screws on the rings that hold the airbox on the carbs... pull off all the small vacuum lines that hook to each carb also.. then gently but you're gonna have to pull hard wiggle the airbox up and once it comes free a little bit, unplug the larger vacuum lines under it. I did it for the first time a few weeks ago and didn't want to break anything.. it didn't seem like there should be that much resistance on it but there is. just be carefull and you'll be allright. hope that helped, -Jayce-
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.