Sport Bikes banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hi guys, new here... I'm parting out my modded 05 R1 on R1-Forum and figured I would post up some parts here to you all as well. The bike is located in Huntsville, AL...

Lots of parts left, including the frame/motor/subframe etc... I have a clean Alabama Title in hand.

FS: 04-06 R1 - Heavily Modded R1 Complete Part Out : Yamaha R1 Forum

I've decided to part out my entire bike and go a different direction over the off season. Everything on this bike is for sale, down to the frame. I'll try to be as thorough with pictures and descriptions as possible. I also have an excel spreadsheet that is a listing of all parts. Bike has 11,639 miles, clean clear, never down title in hand to go with the frame. I will provide the VIN to any serious buyers. Bike and all parts are located in Huntsville, Alabama. I've sold many items here and on eBay all with good feedback (Roark2 on eBay). All prices are plus shipping/Paypal inside the continental US.

It's all for sale, everything... Shoot me an offer on what you want. I will update this post as stuff is sold.
Parts include:

Black Passenger Pegs - $70
Various Hardware - - PM me with what you need
Front Fairing Stay (Factory Yamaha- Perfect) - - $150
Front Forks - $250- - Serviced, clean, ready to go
Evotech Gold oil Cap - $25
Subframe Straight clean - - Still Available
Galfer Rear Line (black/gold fitting) - - I have two of these - - $40
Rear Caliper - - $30
Rear Master Cylinder & Reservoir - $45
Swing Arm - - $135
Factory Shock - - $50
Clip Ons/throttle/etc (everything but grips) - - $130
Front Axle & Bolt drilled for safety wire - - $30
Front Caliper Bolts (drilled for safety wire) - - $20
Rear Axle & Spacers (rear nut drilled for safety wire) - - $35
2005 Frame w/ Clean/Clear Alabama Title- Still Available (PM Me for VIN and copy of Title) - - $2,500 OBO
Motor - $700 - You pay shipping
PC3 - $175
Smoke Integrated Tail light - $50
Smoke flush mounts - $20
Smoke mirror block off signals - $20
OEM Black Levers - $30
Yamaha Solo Seat Cowl - $120
Carrozerria Wheels - $1,200
All Plastics - - On Hold - - PENDING
Bare Raven Gas Tank- - PENDING
Smoked Headlights - $200- - PENDING
Cluster - $100 - - PENDING
Pazzo Levers - $130- - PENDING
Elka Rear Shock - $600
Puig Windscreen - $50
Stock Windscreen (black) - $25
Vortex Rearsets - $300
OEM Black Rearsets - $120
Galfer Front Rotors - $350
Galfer Rear Rotor - SOLD
OEM front Rotors - $45
Adjustable Kickstand - - SOLD
Passenger Seat - - SOLD
Lock set including top triple-- SOLD
BNIB Vortex 17T 530 Front -- SOLD
Complete Front Brake Assembly - - SOLD
Carbon Tank Cover - - SOLD
Keyless Gas Cap -- SOLD
L/R Ram Air Tubes -- SOLD

Most of the aftermarket parts including wheel/suspension have less than 1,500 miles total.

Here is a picture of the bike last week...

Gold Vortex Rearsets: $300 OBO (these have 2 rides on them includes both rods and all accessories)

Yamaha Solo Seat Cowl (Raven/Black): $120

Galfer Front Rotors (pair): $350

Elka Rear Shock- - Sprung/valved for 200Lb rider, best riding and performing shock I've used. Like new, Perfect Condition: $550

OEM Gauge Cluster (11K miles): $100- - PENDING

Frame (clean/clear title) never wrecked etc... $2,500 --- Prefer local pickup, will ship at your expense. Will provide VIN and photo of title to any serious buyers.

Motor (11K miles) Complete air box to oil pan and header with wiring harness--- Runs clean, strong... Developed a hard shift issue last ride, all gears are in tact and working, just difficult to shift (clutch maybe).. $700 --- Prefer local pickup will ship at your expense.

OEM Passenger Pegs (Automotive black): $70
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.