Sport Bikes banner

1 - 20 of 26 Posts

·
Banned
Joined
·
3,018 Posts
Discussion Starter #1
I have an 03 R6. The signals in the front have 3 wires coming out of them

Left side:
Black
Blue
Brown

Right side
Black
Blue
Green

The new signals have only 2 wires
Black
Black and White together

I am not sure what wire on the new lights go to the wires on the bike!!! :mad:

Someone told me a way and it doesn't work!! :mad: I already blew up a fuse trying this. I just looked through the owner's manual and the service manual and I don't see anything about the color coding of the wires.

Could someone please tell me what wires to connect from the light to the bike????????????????????

Thanks in Advance!!
 

·
Registered
Joined
·
1,689 Posts
RSixxygrl said:
I have an 03 R6. The signals in the front have 3 wires coming out of them

Left side:
Black
Blue
Brown

Right side
Black
Blue
Green

The new signals have only 2 wires
Black
Black and White together

Could someone please tell me what wires to connect from the light to the bike????????????????????

Thanks in Advance!!

RSixxy,

The Black is the (-)
The Blue is the "lit" position (+)
The BROWN (L) is the actual turn signal / GREEN (R) "" "" "" ""

The rears:
Black is the (-)
Black w/ tracer is the (+)

I will look it up for absolute certainty...........I will be back!
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #3
thanks! I am not working on the rears just the front ones

But I need to know what wires on the lights go to what wires on the bike. AHHHHHHHHHHHHHHHH this is driving me nutz!!!!!!!!!!!!!!!!! Been trying to figure this out for a few days now!!
 

·
Registered
Joined
·
1,689 Posts
OK..............

You gave the wire colors to the assemblies themselves.............

What are the wire colors from the connectors to the loom???
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #5
ok you lost me....English please LOL

The flushmount wires

One is black
the other is striped (black/white)

The bike:

Left side
Black
Blue
Brown

Right side
Black
Blue
Green

I know I am not going to have running lights but only turning signals
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #7
yes they are--from Lockhart
 

·
Registered
Joined
·
1,689 Posts
OK....................SIMPLE

LEFT T/S = BROWN
RIGHT T/S = GREEN

BROWN = BLACK w/ TRACER
GREEN = BLACK w/ TRACER

BLACK = GROUND (-)


Let's see it works doll!


Sorry my misread.
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #9
ok got that BUT

on the actual flushmount where does the black wire go to? AND where does the striped (black/white) wire go to?

Would it be easier if I took a pic??
 

·
Registered
Joined
·
1,689 Posts
RSixxygrl said:
ok got that BUT

on the actual flushmount where does the black wire go to? AND where does the striped (black/white) wire go to?

Would it be easier if I took a pic??

BLACK WIRE (FLUSH MOUNT) CONNECT IT TO THE BLACK LOOM WIRE (X2)

BLACK w/ WHT TRACER (FLUSH MOUNT) CONNECT IT TO THE BROWN LOOM WIRE(L)

BLACK w/ WHT TRACER (FLUSH MOUNT) CONNECT IT TO THE GREEN LOOM WIRE(R)

There it is!
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #11
Ok I am going to go try this out right now!! I will be back in a bit....thanks...let's hope it works :D
 

·
Registered
Joined
·
1,689 Posts
RSixxygrl said:
Ok I am going to go try this out right now!! I will be back in a bit....thanks...let's hope it works :D

Standing-by.............Should work fine!

The values should be as follows:
BLACK = GROUND (-)
BLUE = RUNNUNG LIGHT (+)

BROWN = LEFT T/S (+) (SWITCHED POWER)
GREEN = RIGHT T/S (+) (SWITCHED POWER)


FLUSH MOUNTS:

BLACK = GROUND (-)
BLACK w/ TRACER = T/S (+)
 

·
Registered
Joined
·
100 Posts
Sounds good to me, just with the flushmounts you wont get to have running lights anymore.
 

·
Registered
Joined
·
1,689 Posts
JLAUDIO29 said:
Sounds good to me, just with the flushmounts you wont get to have running lights anymore.

TRUE...........

It is unknown whether RSixxy bought them, they were given or what. The proper LP F/M should have had 3 wire leads.
 

·
Registered
Joined
·
100 Posts
Well from what im guessing she only has 2 wires. i beleive when i was in the bike shop last week buying my signals for the rear, i noticed there was some with 2 wires. not quite sure though everything passed today is quite hazzy becuase of last night. Would make sense to have 3.
 

·
Registered
Joined
·
100 Posts
Just checked the LP site, they have both Dual and Single filament F/M's
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #19
Hey Blue!! thanks you! ;)

Ok think I got it. I have one side done with the light in the rubber sleeve of the right fairing.

I am working on getting the rubber sleeve off of the left signal (old) to place the new signal in!!

I may have to cut part of the rubber though.

I have the signals from Lockhart that have 2 wires, my bike wires are 3. So there will be no more running lights--just turn signals!!
 

·
Banned
Joined
·
3,018 Posts
Discussion Starter #20
Jammin Johnny--thanks so much for your help ;) I have to just put the left light into the fairing with the rubber short sleeve from the old signal and the fairings go back on and I am in business!!!
 
1 - 20 of 26 Posts
Top