Nah. The actual 'seal' is an O-ring under the 'wiper'. Keep the polished section of your fork tubes clean, wipe it down with some greaseless lubricant after cleaning and you should have no problems (unless you are a stunta).
Ok so i'm no stranger to working on engines but i'm having an issue with my zx6r. I pulled the cams for a shim change and a new cam chain tensoner. I reassembled everything and tried to do the standard hand rotation prior to buttoning it all up. Well the darn thing won't spin; I can get it to...
I recent bled my brakes and didnt reinstall the small metal clip seen in this video at 2:38 at the bottom of the reservoir. I was wondering if this will cause any problems? Didnt look like it did very much.
Thanks for the help
Alright, so I got a '98 XJ600S. Sometimes when I ride, the clutch will stop engaging. The clutch lever will pull the cable, and pull the clutch arm, but the clutch won't allow me to drop RPMs so I can shift. Then when the clutch finally starts working, the lever is very loose. When I pull the...
I'm trying to replace my clutch cable on my Suzuki katana 95 but im missing a piece therefore I don't know the exact length of it to compare to another wire that would fit it. Does anyone know the exact size of this clutch cable