Sport Bikes banner

1 - 2 of 2 Posts

·
Registered
Joined
·
111 Posts
Discussion Starter #1
I was wondering if anyone knows of a write up on "How to install a clutch" in a CBR. My bike is an F3 and I purchased a Kevlar kit and want to install it, but I am wondering how hard it is to do. Anyone who has installed one before let me know.
 

·
Registered
Joined
·
4 Posts
it's not hard. just be careful of the oil dripping out. also, when you are taking it apart, pay attention when you get down to the last disc, which one it was, whether it was a metal disc, or the friction disc. and just start backwards from there. if you only get friction discs, make sure you scuff the metal discs and get all the black burnt sections off. you will need to soak the new friction discs in oil overnight before you begin. just take you time and pay attention. everything should go back together tight with no freeplay, if there is play. your outside plate is in wrong. good luck- joe
 
1 - 2 of 2 Posts
Top