Sport Bikes banner

1 - 2 of 2 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter · #1 ·
05 CBR600RR has been sitting for years. Pretty much started it here and there to take it down the block. One day the bike was tipped over. (bro in law took it for a spin and didnt put kick stand all the way down) Bike didn't want to start ever since. I checked all the fused and got nothing unless I missed a specific fuse idk. Thought it was the fuel pump so i bought a used one off ebay. Same sh*t. Doesn't start. Gauge won't work either. Lights just blink and HID's won't come on. Bike has a new battery. Did some reading on here and learned to bypass the BAS. Wired it up and BOOM! Gauges work perfect and HID's are on HOWEVER, the pump still won't prime. I opened up the intake and sprayed starting fluid to see if it would atleast turn over with that but it hasn't. What do I go guys? I need this bike gone. Haven't rode in years and don't plan on it as I have a child now. Need your help asap. Bike only has 2,500 miles. Its mint.
 

·
Registered
Joined
·
2,274 Posts
Damaged a cut out switch when it went over ? Bypass every cut out you have , tip over sensor , side stand , kill switch .. etc etc .. See what happens then .
 
1 - 2 of 2 Posts
Top