Sport Bikes banner

1 - 4 of 4 Posts

·
Registered
Joined
·
34 Posts
Discussion Starter #1
Ok I have a 97 900rr, I put some signals on it and the right side works but the left does not.

When you slide the switch the rt. will trip the relay to signal

However the left there is not signal no clicking, nothing.

Any ideas?

I have to look into the switch etc, but does the relay run both signals?
There are 3 wires going to the relay
 

·
~ Master Technician ~
Joined
·
2,176 Posts
Have you tried switching the lights around and make sure they both work?

Did the old signals work before you got your hands into the wiring?
 

·
Registered
Joined
·
34 Posts
Discussion Starter #3
The problem is before the light, the relay does not even click to send the signal to the light.
 

·
Registered
Joined
·
501 Posts
you might need a variable load relay since you are drawing different current on the new signals than you were on the old ones. you bike thinks a bulb is burnt out. what I did with my bikes, i don't know if you can do it with your, I replace my flasher relay with a variable load one for trailers. got it at advance auto parts. I have the 2 prong flasher in an L, I don't know if they carry the type you need, but that might be your problem.
 
1 - 4 of 4 Posts
Top