Sport Bikes banner

1 - 2 of 2 Posts

·
Registered
Joined
·
392 Posts
Discussion Starter · #1 ·
Anyone have any idea of a method of taking off the swingarm pivot nut. It's a round nut with cutouts much like a spline nut. Graves directions state that I should use a spanner wrench but its not working. I know I can order it from the following company but they have no will call pick up and I want to do the install today. The nut looks like this ---> http://www.high-concept.com//index....facturer_id=0&option=com_virtuemart&Itemid=26
 

·
Premium Member
Joined
·
20,922 Posts
Anyone have any idea of a method of taking off the swingarm pivot nut. It's a round nut with cutouts much like a spline nut. Graves directions state that I should use a spanner wrench but its not working. I know I can order it from the following company but they have no will call pick up and I want to do the install today. The nut looks like this ---> http://www.high-concept.com//index....facturer_id=0&option=com_virtuemart&Itemid=26
I suppose you could make your own with a large socket and a grinder, or use a punch and a hammer, but that is a damn good price for that tool!!!

As swingarm pivot nut tool from RaceTech is $80! And their wrench for the pivot bolt is another $40! That tool does both for only $8.99? Damn!
 
1 - 2 of 2 Posts
Top