Sportbikes.net - View Single Post - SET Valve Mod Question K6-K7-K8 600/750 (Updated w/K5-K6 1k info)
View Single Post
post #10 of (permalink) Old 02-13-2007, 07:01 PM
jk750
Anything
 
jk750's Avatar
 
Join Date: Jun 2004
Location: Right Here, Right Now
Posts: 20,922
Thanks: 3,695
Thanked 2,425 Times in 1,239 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
           
If you follow the instructions, and follow the cycle of the SET valve when you turn the key on, you can figure out when it is open or closed.

Or, after you unplug/disable the servo motor, you can manually open/close the valve with pliers while the engine is running.

Open = louder, closed = quieter.

If you have an aftermarket full exhaust, your SET valve went away with the original exhaust into the corner of your garage. You will want to unplug the correct wire in the ECU to eliminate the flashing FI light, and get rid of the actuator cable, and the servo motor if you want.

Once you unhook the servo actuator cable, the SET valve will automatically snap OPEN and stay there.





To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
jk750 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome