What mods everybody planning or done?

qiknes · 12-02-2005, 08:19 PM

Looks like the other discussions have died out. Thought I would start up another. I know the fact that most places arent listing anything for these bikes has already came up. The 00-02 ZX-6R parts fit, anyway this spring things will surely be listed...whats everybody planning??

WSU_bean · 12-04-2005, 11:21 PM

Plannin on putting a new pipe on there cause i scratched it all up. A tail light integrator and then flush mounts up front. Thats pretty much it, maybe some different sprockets. I can't wait until i can actually get to ride again.

bigw00dy · 12-05-2005, 12:15 PM

yeah im looking into getting the tail-light intergrator as well. But i have been looking for a rear-seat cowl. I dont even care if it is painted. I just dont want to lose the lock function. I dont think the 00-02 have the same lock location. I may be wrong though

WSU_bean · 12-06-2005, 12:34 AM

i believe it is the same lock location. These bikes are identical i thought but i don't know for sure. Yeah i want a solo cowl too but they are pretty flat on our bikes. Or atleast the ones i have found. They are pretty much i dentical to the seat but sit flush with the fairing. Id like one but it isn't up on my list of things to get.

qiknes · 12-06-2005, 05:06 AM

I am planning...
-Corbin seat
-Titanium slip on/bolt on Akropovic exhaust..maybe a Muzzy depending on who is having the best deal at the time.
-Stage 1 jets
-Ignition advancer
-Maybe a sprocket change (to get a little more torque)
-Double bubble winshield, smoke or silver to match the bike...not made up my mind yet.
-A few more carbon fiber goodies...ram air intakes for sure...
-Steel braided brake lines..silver of course!
-Flush mount signals, clear lenses w/ amber bulbs for the front.
-Undertail kit to replace fender & ministalker turn signals, clear w/ amber bulbs
-Integrated clear tail light w/ red bulbs
-Seat cowl
So far this is what is planned. We all know how plans work..hehe

WSU_bean · 12-07-2005, 11:48 PM

I was also thinkin about maybe putting on the 05 636 wheels. They have the same specs and stuff as my wheels but look way nicer. Does anyone know for certain that they will fit? But i think that they would look better than my current wheels.

bigw00dy · 12-08-2005, 12:12 PM

Quote:

Originally Posted by WSU_bean

I was also thinkin about maybe putting on the 05 636 wheels. They have the same specs and stuff as my wheels but look way nicer. Does anyone know for certain that they will fit? But i think that they would look better than my current wheels.

I was thinking that too. Those rims are nice!! Probly be able to find sum on ebay soon enough

WSU_bean · 12-08-2005, 03:21 PM

You can already, the back wheels aren't too spendy sometimes but man those front rims are way more expensive. I like the looks of those rims way better than my current ones. Is there any weight difference between the two, and how many teeth does the rear sprocket on the 636 have?

WSU_bean · 12-14-2005, 02:58 AM

what happened? the three of us were finally postin up in this sub forum. I must be the only one left with a zz 6. just a whittle wonewy.

bigw00dy · 12-14-2005, 08:11 AM

maybe a dumb question...do they make a high-mount exhaust for my shiz..?

qiknes · 12-14-2005, 05:48 PM

I am sure in the new accessory catalogs they will be listed. For now you can find them under the 00-02 Ninja ZX-6R.

Yeah, why we not postin???

WSU_bean · 12-14-2005, 05:57 PM

i asked if there was a high mount too but no one knew. If you find a good site or catalog post it up cause i wanna get a high mount too.

MistaDreamMaker · 12-14-2005, 06:50 PM

Hey I am looking for websites with parts for this bike!!! I was told by parts department where I got the bike that some parts from zx6r will not fit this bike. I am adding a Muzzy ASAP. Would like to add Fender Eliminator, Flush mount front signals, frame sliders, and a new set of wheels. Can anyone help me out with info!!!!!!

WSU_bean · 12-15-2005, 02:02 AM

we are pretty much in the same boat. But what kind of wheels are you thinkin about adding?

ifgshooter · 12-18-2005, 08:52 PM

Try www.hugeindustries.com for the fender eliminator, they run $39.99 and you can add turn signals as well. They're great people to deal with. Any part for the '00-02 ZX6r will fit the '05-06 ZZR600, but the '98-99 ZX6r is only different than the ZZR600 around the headlight and ram-air intake. Also try
http://store.58cycle.com/SearchResults.asp?Cat=108, for ZX6R/ZZR600 parts. www.pazzoracing.com for brake and clutch levers, www.denniskirk.com, or www.ronayers.com and even www.targa-acc.com. There are many others out there but these are the main ones I deal with. You should also check out www.superbrace.com for the greatest fork brace known to man, I use it and it really improved the way my ride handles.