Great ride this weekend. Not sure if they have a picture of the bike that was coated in tiger striped fur.
http://www.pacwestsportbikebbq.com/
Got bike back from the shop for its first tune up. I will say it seems to run a little smoother. They made a few adjustments to the clutch and idle. It still makes a clunking noise. And as far as it being MY problem. Lets look at it. I'm sitting in neutral, I pull clutch in fully. I touch no throttle. I step on shifter to put it in 1st and you hear *CLUNK*. Now, maybe I don't race bikes professionally, nor do I claim to be a bike mechanic. I have however owned 11 bikes and started with a mini-bike in the 4th grade (I'm now 33) and never has any of my bikes made this kind of a catch. As for shifting at 10k RPM, I can do that sure, but from 1st to 2nd I would probably be doing close to 50mph and end up a bumper sticker. I also mentioned that it only happens in first 3 gears. So I don't know, maybe I just remember how to shift in 3rd gear and it takes me 3 gears everytime to figure it out. Anyhow, I simply stated what I have observed, this coming from someone who actually owns the bike.
I am excited about the upgrades for my bike. So many things to do.
Getting new exhaust, re-jet carbs, -1 on counter shaft for acceleration, passenger-seat cowl, wire mesh the fairing holes with silver mesh, blue neon for the ground, removing stock blinkers and installing low profile custom blinkers, a blinker SHUT OFF, black leather half tank bra, silver frame sliders, advanced air filter, and cutting down the plastic that holds the license plate.
Then I may have a friend do a new paint job on it, probably wait until I lay it down though since I like the blue.
And so now I have over 1200 miles on it and yes it can pick the front tire up without the clutch. I'm still getting used to the new adjustments so I only take it up bout 6 inches but I'm fairly confident it will go up further. Not gonna try it till I get new mods though, especially my sliders. Anyhow, I will post some pics in a couple of weeks. Parts are being ordered and gonna schedule the work on Thursday.