Ducati 1199 Panigale Parts - Sportbikes.net
User Tag List

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 65 (permalink) Old 05-03-2012, 05:37 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Ducati 1199 Panigale Parts

If you are looking for 1199 parts, watch this thread. We will be adding parts that we have fit tested on our 1199 Panigale as well as new parts that we are developing with other companies.






MW Billet Q/R Fuel Cap: Ducati 1199 Panigale
$149.99
This high quality fuel cap made of billet aluminum is made in Italy. This fuel cap is anodized black and includes all the mounting bolts you need and the breather tube comes pre-installed. Available in Black, Gold, or Silver.
Stock 1199 cap weight .8lb. This billet cap weigh .45lb.




CF Fuel Cap Quick Release: Ducati 1199 Panigale
Was:$179.99
Sale:$165.00
Carbon Fiber quick release fuel cap for the Ducati 1199 Panigale.
Stock 1199 cap weight .8lb. This carbon fiber/aluminum cap weigh .40lb.


OBERON Billet Foot Pegs: Ducati 1199 Panigale
Was:$54.95
Sale:$49.00
Pair of footpegs from Oberon. Each kit is a direct replacement for your original footpegs, you will need to re use your pin and spring assembly. Available in two different styles. Length of smaller peg (excluding hanger/fitment) is 80mm and width of peg is 19mm. Length of larger peg (excluding hanger/fitment) is 90mm and width of peg is 26mm. Installed overall length of OEM peg is 100mm, overall length of Oberon large peg is 120mm, overall length of Oberon small peg is 110mm.



Shorai Lithium Iron LiFePO4 Battery KIT: Ducati 1199 Panigale
$189.95
Installation requires using the included negative cable and raising the positive cable due to the Shorai battery being slightly taller. Also the OEM top battery bracket will not work and so we include a longer bolts/spacer and zip tie to secure the battery to the tray.
  • 18 Amp Hour, 270 Cold Cranking Amps.
  • Ultra-light weight - 2.19 lb.
  • Ultra-compact - 5.83” x 4.13” x 2.60”
  • Includes longer negative cable specifically for the Ducati 1199 Panigale
  • Weight savings over stock battery is 4.4 lbs and increases cranking power significantly. See video on our website to see the difference




BST 7 Spoke Front Wheel: 1199 Panigale
Price: $1,845.00
Sale: $1,752.75
BST 7 Spoke Rear Wheel: 1199 Panigale
Price: $1,995
Sale: $1,895.25
BST rear wheel alone saves about 2 lbs over the very light OEM Ducati "chicken feet" Marchesini forged rear wheel.
Available from Motowheels in Matte or gloss finish for the 1199





CORSE DYNAMICS Eccentric Chain Tool: Large Axle
$28.95
Easy to use single sided swingarm adjustment tool for Ducati 1199 and all other Single Sided Large Axle Swingarms.
CNC machined for optimum fit and handle comfort, no slip style featuring 4 seperate faces contacting the eccentric spanner nut

Last edited by motowheels; 08-02-2012 at 12:37 AM.
motowheels is offline  
Sponsored Links
Advertisement
 
post #2 of 65 (permalink) Old 05-03-2012, 05:40 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 

RHINOMOTO Front Axle Slider: Ducati 1199/1098/848 SF S4Rs
$59.99
Sliders help protect the front axle, axle nut, fork bottoms, brake calipers and wheel during a crash and slide.
This kit installs in less than one minute per side with only a 5mm key key. They remove just as quickly for maintenance and can be reinstalled virtually an unlimited number of times.



AEM 6 Hole Sprocket Hub Cover
$149.95
Weighing just 0.55 lb, the AEM Sprocket Hub Cover reduces un-sprung and rotating mass.

Pictured with CORSE DYNAMICS Titanium Cush Drive Pins The combination weighs .65 pounds lighter than original








RHINOMOTO "CRG" Handle Bar Sliders: Ducati 1199 Panigale, Aprilia RSV4
$69.95
Allows you the option of mounting a mirror on the bar ends.

Last edited by motowheels; 06-05-2012 at 10:52 PM.
motowheels is offline  
post #3 of 65 (permalink) Old 05-04-2012, 03:32 AM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Ducati 1199 Mirror block off plates


CORSE DYNAMICS Mirror Blockoff Plates - Ducati 1199 Panigale
Retail:$54.99

Clean up the front end of your Panigale with a set of Corse Dynamics mirror block off plates.
CNC machined billet aluminum in the United States of America
Available in black anodize only

Original mirror weight - 2.5 lbs
Block off weight - 0.10 lbs
2.4 lb savings


Last edited by motowheels; 05-18-2012 at 12:12 AM.
motowheels is offline  
post #4 of 65 (permalink) Old 05-10-2012, 03:16 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Quick Release Metal Fuel Connectors: Ducati 1199



Q/R Metal Fuel Connectors: Ducati 1199 Panigale

These quick release fuel connectors are chrome plated brass. An upgrade over your fragile stock plastic connectors that have issues under heat and pressure.

Pre Order Special. ETA 05/17/12
Was:$44.95
Sale:$39.95
motowheels is offline  
post #5 of 65 (permalink) Old 05-11-2012, 05:20 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
OBERON "Bar End" Turn Signals Kit: Ducati 1199 Panigale



OBERON "Bar End" Turn Signals Kit: Ducati 1199 Panigale

Bi-directional LED handle bar mounted motorcycle indicators from Oberon Performance that flash front and back to increase visibility. Available in black or silver.
Since the 1199 Panigale uses a threaded handlebar this kit was developed to save from damaging those threads when using the bar end turn signals by. Instead of using an expanding collet this kit uses a larger hollow bolt that threads into the stock handlebars. If you already have bar end turn signals you can order just the fit kit separately.

Pricing:$149.00


pictured with CRG Blindsight Mirror: Black

Last edited by motowheels; 07-26-2012 at 11:26 AM.
motowheels is offline  
post #6 of 65 (permalink) Old 05-15-2012, 10:22 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
CORSE DYNAMICS Ride Height Tool: Ducati 1199 Panigale


CORSE DYNAMICS Ride Height Tool: Ducati 1199 Panigale

With adjustable linkage featured on the 1199 comes the need to keep track of ride height, ride height controls every aspect of handling and is crucial in being maintained. This tool easily slides into the frame on the left hand side for consistent measurements everytime.

*Will not work with DP rearsets as the frame support is changed on these rearsets

Made in the United States of America

Measure ride height with ease and 100% accuracy everytime



$69.95

Last edited by motowheels; 07-20-2012 at 03:09 PM.
motowheels is offline  
post #7 of 65 (permalink) Old 05-15-2012, 10:22 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
CORSE DYNAMICS Rear Brake Caliper Bracket - 1199 (Increased Wheel Base)



CORSE DYNAMICS Rear Brake Caliper Bracket - 1199 (Increased Wheel Base)

Increase wheelbase at a fraction of the cost of a new swingarm

Rear bracket adds an additional 5mm of length for additional stability and tire clearance.

CNC machined and FEA tested for optimum strength & weight

Please Call for Availability
916.369.2509
Currently in R&D planned ETA of June 1st
motowheels is offline  
post #8 of 65 (permalink) Old 05-19-2012, 06:44 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
CarbonVani Carbon Fiber 1199 Panigale

Some CF on route from Italy ETA 06/20/12


Carbonvani Carbon Fiber Belly Pan Street: 1199 Panigale
$588.00
BELLY PAN - ROAD VERSION


Carbonvani Carbon Fiber Exhaust Guard: 1199 Panigale
$273.00
EXHAUST COLLECTOR GUARD


Carbonvani Carbon Fiber Front Fender: 1199 Panigale
$259.00
FRONT FENDER


Carbonvani Carbon Fiber Full Fairing Street: 1199 Panigale
$3080.00
FULL FAIRING -ROAD VERSION


Carbonvani Carbon Fiber Headlight Fairing Street: 1199 Panigale
$812.00
HEADLIGHT FAIRING- ROAD VERSION


Carbonvani Carbon Fiber Key Guard: 1199 Panigale
$175.00


Carbonvani Carbon Fiber Left Side Panel: 1199 Panigale
$588.00
LEFT SIDE PANEL



Carbonvani Carbon Fiber Right Side Panel: 1199 Panigale
$238.00
REAR HUGGER
motowheels is offline  
post #9 of 65 (permalink) Old 05-19-2012, 06:45 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
STM Elliptical Reservoirs



STM Reservoir: Brake 40cc
Was:$94.95
Sale:$90.20

STM elliptical clutch and rear brake reservoir. The STM reservoirs utilize the original mounting bracket so they are a simple install, though you will have to add more fluid and re-bleed your system upon install. CNC machined from billet aluminum and anodized in black, gold or red. 40cc Fluid capacity




STM Reservoir: Clutch / Rear Brake 20cc /45
Was:$88.95
Sale:$84.50
STM elliptical clutch and rear brake reservoir. The STM reservoirs utilize the original mounting bracket so they are a simple install, though you will have to add more fluid and re-bleed your system upon install. CNC machined from billet aluminum and anodized in black, gold or red.
These reservoirs have a 45 outlet.
20cc Fluid capacity.

Last edited by motowheels; 05-20-2012 at 12:59 PM.
motowheels is offline  
post #10 of 65 (permalink) Old 05-20-2012, 01:00 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
CORSE DYNAMICS Full Floating Rotor Button


CORSE DYNAMICS Full Floating Rotor Button

$85.92 set

Made of air craft grade 7068 Hard Anodized Aluminum
Free floating brake buttons will allow you to convert the 1199's semi floating rotors into full floating rotors. Free floating rotors reduce the drag from the pads which in turn reduces the heat build up in the rotors and the heat transfer to the fluid. These free floating buttons will allow the bike to roll easier and reduce the unsprung rotating weight by over .5 pound.
Hard Anodized aluminum buttons with stainless steel clips
Designed for all Brembo rotor applications OEM & Aftermarket with 5mm thickness.
Sold each (12 needed for the 1199)
motowheels is offline  
post #11 of 65 (permalink) Old 05-20-2012, 01:04 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
NK Components Titanium Rotor Bolts


NK Components Titanium Rotor Bolt
$89.50 set
These ultra lightweight bolts are constructed of Ti6Al4V Grade 5 Titanium, precision machined with a hex head, torx inner provision, and center gun drilled entirely through the bolt for optimum weight savings.
These bolts measure M8 x 20 / 1.25 pitch, weighing 4 grams per bolt.
Designed as rotor bolts for all Ducati and Aprilia applications. Sold each. The 1199 Panigale requires 10 bolts for the front rotors.
motowheels is offline  
post #12 of 65 (permalink) Old 05-23-2012, 05:25 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
CORSE DYNAMICS Clutch Cover: Ducati 1199 Panigale


CORSE DYNAMICS Clutch Cover: Ducati 1199 Panigale
Retail:$249.95

Constructed of billet aluminum with crash protection, fluid retention and abrasion resistance in mind.

After extensive R&D we have determined the clutch cover is going to be one of the main impact points in the situation of a crash on the right side of the 1199 Panigale. The factory cast clutch cover in abrasion locations is less than 0.080" thick leaving no chance of containing oil in the case of impact.
Corse Dynamics has designed a complete replacement clutch cover (AMA homologation pending) to ensure oil containment and abrasion protection, keeping you on the road and out of the garage.
Clutch cover has all OEM accessory provisions and is designed to use OEM rubber damper or without to reduce weight.


Last edited by motowheels; 07-20-2012 at 03:04 PM.
motowheels is offline  
post #13 of 65 (permalink) Old 05-23-2012, 05:27 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
Titanium spring for the 1199


Titanium spring.
2.4 lbs OEM spring
1.0 lbs titanium spring
Saves 1.4 pounds.

Since the titanium spring isn't wound as tight there is no need to run the plastic shock guard, further showing off the cool spring.
Contact Nick@motowheels.com for details on the lightweight titanium spring.
-M
motowheels is offline  
post #14 of 65 (permalink) Old 05-25-2012, 06:06 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
OZ Racing Cattiva Magnesium Wheels: Ducati 1199 Panigale


OZ Motorbike Cattiva Forged Magnesium Front Wheel: Ducati 1199 Panigale
$1,848.75



OZ Motorbike Cattiva Forged Magnesium Rear Wheel: Ducati(MTS1200, SF, 1098-1198, & 1199)
$1,746.25

Forged magnesium reduces weight compared to forged aluminum wheels and even some carbon fiber wheels, which decreases the moment of inertia resulting quicker acceleration and braking, lowers un-sprung weight and gyroscopic effect to provide quicker turn-in and more positive handling.
FEM (finite element method) designed to minimize weight and increase strength and rigidity.
Specially treated billet magnesium alloy is bi-directionally forged, resulting in a more uniform and stronger metal structure.
Heat treating, shot peening and CNC finishing are done in house resulting in an extremely lightweight and rigid wheel.
OZ wheels are AMA homologated for racing and also used in World Super Bike, MotoGP 125, Moto2, British Super Bike, IDM German Superbike and [/FONT]Bol d'Or 24-hour endurance racing.





motowheels is offline  
post #15 of 65 (permalink) Old 06-26-2012, 09:56 PM Thread Starter
Site Sponsor
 
Join Date: May 2008
Location: sacramento
Posts: 3,816
Thanks: 0
Thanked 3 Times in 3 Posts
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
 
OZ Motorbike Piega Forged Aluminum Wheelset: Ducati 1199 Panigale

OZ has created a DOT/JWL approved 5 forged aluminum spoke wheel that is light as a 5 spoke magnesium Marchesini wheel.



OZ Motorbike Piega Forged Aluminum Front Wheel: Ducati 1199 Panigale
$777.47

OZ Motorbike Piega Forged Aluminum Rear Wheel: Ducati MTS1200, SF, 1098-1198, & 1199
$1,222.48

OZ MOTORBIKE is part of the OZ Group which includes OZ Racing, a company from San Martino di Lupari (Padova), Italy which since 1971, leads the car and motorcycle aftermarket wheel industry. For over 35 years, the OZ brand has been recognized as a symbol of excellent quality and Italian design. And today, with this new project, OZ MOTORBIKE makes its world-wide appreciated and known brand even stronger.

•FEM (finite element method) designed to minimize weight and increase strength and rigidity.

•Reduced wheel weight decreases the moment of inertia which results in quicker acceleration and braking, lowers un-sprung weight and gyroscopic effect to provide quicker turn-in and more positive handling.

•Specially treated billet aluminum alloy is bi-directionally forged, resulting in a more uniform and stronger metal structure.

•Heat treating, shot peening and CNC finishing are done in house resulting in an extremely lightweight and rigid wheel.

•Dot and JWL approved for street use.

•OZ wheels are AMA homologated for racing and also used in World Super Bike, MotoGP 125, Moto2, British Super Bike, IDM German Superbike and Bol d'Or 24-hour endurance racing.

•Included parts: bearings, valve stems, axle spacers (as applicable) and sprocket adaptor.





motowheels is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Sportbikes.net forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.




Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick demo of the 1199 Panigale ANORXIC'51 General Sportbikes 7 05-03-2012 05:32 AM
2012 Ducati 1199 Panigale Review - Video admin Breaking News 1 04-10-2012 02:41 AM
1199 Panigale RS Rhetorik Sportbike Videos and Reviews 10 03-13-2012 09:13 AM
1199 Panigale, first ride Shamrock627 General Sportbikes 9 02-28-2012 06:34 PM
Ducati 1199 Panigale arcticamt6 General Sportbikes 148 11-10-2011 04:43 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

 
For the best viewing experience please update your browser to Google Chrome