removal of key start on 636

855m0n0 · 02-07-2005, 12:50 PM

I have a 636 that I am going to race in the WERA National Challenge Series this year. Last season I raced a 2001 R6. On my R6 I removed the entire key start assembly so that I could start the bike with out it. I would like to do the same for my 636. Is this possible? On the R6 I rigged up a power cut near the battery and had the ignition perminantly soldered on. Is this possible with the 636, if so, which wires?

Just FYI the reason I like to setup my bike this way is becuase I have left my keys in the garage and then when to the track 500 miles away and had no way to race. Anyway. Any help would be great.

ncpartsguy · 02-07-2005, 01:37 PM

Any 636's come up missing in Atlanta, ^ 855m0n0 ^ DOESN'T have them.

Just FYI...
I don't think it's a good idea to be asking for or giving this information out publicly. If anyone has an answer, you might want to request that they PM you with it.

Just my $.02 worth.

855m0n0 · 02-07-2005, 02:50 PM

Just FYI MOST race bikes are setup this way and WERA VIN checks all race bikes. They copy your VIN onto your tech form every race.

If someone steals a bike they could just go to a salvage yard and purchase an entire new key set, ignition, and gas cap for under $200.00. It would look less suspiscious anyway.

ncpartsguy · 02-07-2005, 05:59 PM

You're absolutely right. I was just jerking your chain.

I had an F2 race bike set up this way also. I just posted that reply because I wouldn't want to make it any easier for any thieves of opportunity.

855m0n0 · 02-07-2005, 06:24 PM

Cool. In that case. . . please PM the way to do this rather than post it.