Tail light Intagrator kit

[mitchellgt]

this thing is giving me soooo much trouble i cant hardly believe it.

i think from the looks of it, everything is hooked up right, but its obvious something is wrong.

the tail lights work, the brake light works, when i hit left or right blinker both bulbs blink. if i hit the brake light while the blinker is on, the tail light goes solid as a brake light, and stops blinking, and the front blinkers go hyper. if anyone has any insight to this problem, or what might be the problem please help.

ps, both bulbs are good. and the bike i am doing this on is a 94 cbr 600 f2.

[mikofz1]

I just hooked mine up recently, but the only problem I have, is I need to get a different relay so that my signals flash at a slower rate. So without knowing how you hooked it up, it's tough to troubleshoot the problem. Sounds like you may have tied into the tail light circuit. This should not be messed with. It's a seperate circuit. On mine, I just spliced into the brake lights. The factory manual and a DMM came in handy for me as I didn't have any instructions for my integrator.