If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
FZ6If you’re looking for one bike to perform a multitude of missions, look no further.
Take it from Cycle World* Magazine - “For a more advanced rider looking for a bike to do it all, there is no other choice.”
So, I received my Leo Vince Carbon Fiber Exhaust system today, and I must say, they look saweet! I paid $608 for them, which I thought was a little high in price compared to say the Scorpion Carbon fiber cans, but i liked the look and sound a little better with the Leos. I got a bit of a surprise though as I was assembling them in my room. It appears that with the system, they ship a cat eliminator pipe! Now the price doesnt seem all that bad! My only concern now is, will I need to tune my bike with a PCIII, or just not worry about it? I have the stock intake. And since I know yall will say it, here are some pics .
__________________ Gear: Scorpion Stinger Jacket, AGV Forza 1pc Suit, Teknic VR-II Gloves, TCX SS Performance 2 Racing Boots, Scorpion EXO-700 Burst Helmet ( Destroyed ) Bike: Drummer Muffler, Race ECM, High Flow Air Filter, Hepco & Becker Saddlebags, Front and Rear Axle Sliders, Smaller Rear View Mirrors, Heavy Bar-ends, Zero Gravity Taller Windscreen Are you Biker Friendly?
ahh thanks. All the picture angles I found of the Leos were bad. Plus they have a not so good website, and it said they didn't even have a FZ6 exhaust. I would have liked those as they look really nice and the cat eliminator is pretty sweet to be included.
The only problem I ahve with them at the moment is the pipes angle. You might be able to tell in that last picture i posted. When I level off the left side pipe with the right side pipe, the left pipe isnt very straight.
IE, the back of the exhaust, where the air flows into has maybe a 1 inch gap between the two pipes. At the exit of the exhuast it is maybe a 1/2 inch of a gap between the 2 pipes. Not sure if it is supposed to be that way, guess I will find out when I put them on tomorrow!
__________________ Gear: Scorpion Stinger Jacket, AGV Forza 1pc Suit, Teknic VR-II Gloves, TCX SS Performance 2 Racing Boots, Scorpion EXO-700 Burst Helmet ( Destroyed ) Bike: Drummer Muffler, Race ECM, High Flow Air Filter, Hepco & Becker Saddlebags, Front and Rear Axle Sliders, Smaller Rear View Mirrors, Heavy Bar-ends, Zero Gravity Taller Windscreen Are you Biker Friendly?
Looking to install them tonight when I get home from work. Will do before and after picuters, as well as before and after sound/video clips, onboard and walkarounds. Just wish it was a little warmer outside today!
__________________ Gear: Scorpion Stinger Jacket, AGV Forza 1pc Suit, Teknic VR-II Gloves, TCX SS Performance 2 Racing Boots, Scorpion EXO-700 Burst Helmet ( Destroyed ) Bike: Drummer Muffler, Race ECM, High Flow Air Filter, Hepco & Becker Saddlebags, Front and Rear Axle Sliders, Smaller Rear View Mirrors, Heavy Bar-ends, Zero Gravity Taller Windscreen Are you Biker Friendly?
just looked at the website and am curious if anyone can tell me what the difference is between standard racing and factory racing slipons?
__________________ 2005 FZ-6 Mods: Dual Headlight Mod- Clear LED FLushmounts- Clear LED Integrated TL- Motovation Frame Sliders- Puig DS R Windscreen- PIAA Xtreme White plus bulbs- Center stand removed- More to Come
Leo Vince Carbon Fiber Exhaust
.
)
Linear Mode
