If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Ahhh see you finaly completed the mod, it looks good with the HID's too.
I know I not around here as often as I used to but still check in now and then.
__________________ 2004 FZ6/R6 Blue
FAZR6 FE Kit Click |Dual Light MOD Click |R6 Fork MOD|R6 Calipers |LSL Sliders Click |05 Black Rims|Scorpion CF Exhaust|Corbin Seat|TankSlapper Click |Yamaha Lower Cowl |Clears all around W/Intergrated LED Tail Light| TCP Seat Cowl|Puig DS Screen|Painted Hugger/Front Fairing/Side Cowl/Fender|Garmin E-Trex GPS|Galfer Custom SS Lines|Service Manual PDF Download|05-R6 Projector Headlight retro-fit CLICK ME|Moto-Tote to get it around PICs
Ahhh see you finaly completed the mod, it looks good with the HID's too.
I know I not around here as often as I used to but still check in now and then.
Hey WTVa, glad to see you around here, thought you might have gotten lost. Thanks again for all of the wonderful advice.
quick question about the r6 headlights, are the left and right sides separate? ex. my right side lens is broke and i found a headlight at a salvage yard with a good right but bad left, can they be switched out? im asking since you obviously had to take the r6 headlights apart
quick question about the r6 headlights, are the left and right sides separate? ex. my right side lens is broke and i found a headlight at a salvage yard with a good right but bad left, can they be switched out? im asking since you obviously had to take the r6 headlights apart
The headlight is one large unit, connected in the middle by a bridge of black plastic. Depending on what is wrong with each headlight, you may be able to piece together one complete one. For instance, if only the clear plastic lens is broken on each, you can remove one and put it on the other.
Sorry to resurrect the thread, but I'm just getting around to doing this.
I've got everything installed, and realized: I can't have a high beam! The FZ6 harness is for an H4, and with the H7 + adapter (taken from the FZ6 lowbeam), the bulb won't lock down in the R6 reflector.
If I take the adapter off, I can lock the bulb down fine, but I have no way to wire it up.
Sorry to resurrect the thread, but I'm just getting around to doing this.
I've got everything installed, and realized: I can't have a high beam! The FZ6 harness is for an H4, and with the H7 + adapter (taken from the FZ6 lowbeam), the bulb won't lock down in the R6 reflector.
If I take the adapter off, I can lock the bulb down fine, but I have no way to wire it up.
Good Job !!
Thanks again for all of the wonderful advice.
Linear Mode
