Two Brother's Exhaust Sylencer Mod

[avogt18]

*UPDATED* scroll down...
I was thinking of removing my Two Bro's exhaust and going back to stock, or something else, Cause of the noise. leaving early for work, was disturbing the neighbors. But the two bro's system just sounds so sweet, and is the best looking system of my choice. So i'd figure id find a way to make it quiter without paying $60+ on their sylencers. So, I made my own. Its Alot quieter at idle, and a bit quieter at crusing speed. Basically i got rid of the echo, but kept the deep sound.
I used very thin sheet of aluminum, and cut it out, and made a hole in the center the same diameter as the stock system's exit pipe. And used gasket maker on both sides when installing...Pics describe alot, so here ya go.

[avogt18]

The bike runs the same as before, cant tell a difference in performance. i'll give a better review when its not 35deg's out.....

Yes it's cold outside...

[Justin726]

Looks like a good mod. Love the look of that carbon fiber exhaust.

But bothering the neighbors is part of the deal of having a bike. I remeber when I had my cruiser. It was 1300cc with 3 inch open exhaust. I was working nights at the time and would leave at 10:30 every night. I think that was just payback for their kids running through our yard nonstop durring the day.

[avogt18]

The first mod above was'nt quiet enough for me, so i added another plate along with the first one. its made out of the same stuff, and has a slightly larger hole. And i painted it with flat high temp paint. I like it!, defintatly noticably quieter at idle, and still has the deap roar upon acceleration....

[thatguyx]

dunno if it'll help but do you have an old vid of the exhaust pre-mod and post-mod? might be nice to hear the differences.

[avogt18]

No i dont... but its atleast half as quiet at idle then before the mods. still loud and deap when ya rev it.

[Randomchaos]

Looks like they came that way . Nice job man!

[DefyInertia]

Originally Posted by Randomchaos

Looks like they came that way . Nice job man!

+1

[julius_sk]

Man you didn't do right. Thats the whole point of having loud pipes - they got to be loud Were the neighbours bitching about loud pipes????

[avogt18]

Originally Posted by Randomchaos

Looks like they came that way . Nice job man!

Thanks guys!!

Neighbors were'nt complaining, but theirs an older couple behind me, thats picky about everything. Just trying to be nice....But hey, its still loud when i rev it

[julius_sk]

If they were not bitching i'd never do it. Man i dont get it. I have CF Scorpions. They are loud as hell, but i can come back home at night running 3000rpm and it is quiet that nobody hears it . Besides the silencers take the rumble away at low RPM's
My KTM450 is really loud really but i can come back thumping silently - not much louder than a car.

[marke14]

Dude those pipes look AWESOME!

*drool*

How much did those set you back?

[avogt18]

Originally Posted by marke14

Dude those pipes look AWESOME!

*drool*

How much did those set you back?

$780 shipped from imotorcyclestore....I think they may be alittle higher now for the CF ones like mine.
Btw, you avitar pics looks almost how i ride. white jacket(moto gp), and a red design helmet(bell).

[LarryC]

Originally Posted by Justin726

But bothering the neighbors is part of the deal of having a bike. I remeber when I had my cruiser. It was 1300cc with 3 inch open exhaust. I was working nights at the time and would leave at 10:30 every night. I think that was just payback for their kids running through our yard nonstop durring the day.

Glad you're not my neighbor of courseI don't let my kids go storming the neighbor's yards either

[Parabellum]

Thread bump for this awesome mod.

I just got my two bros exhaust installed and its just way too frakking loud. I had heard people say it was loud, but I had no idea it was going to make my ears ring after even a 5 minute ride.