FZ1 aftermarket mods - Page 3

wraith1027 · 03-05-2008, 04:23 PM

Ok PJ!

'03 FZ1

MIVV Ti GP pipe
Rizoma bars with GYT-R lowering clamp
Rizoma Hand Grips
Rizoma Bar ends to match grips
Rizoma Turn signals
Fabbri smoked windscreen
Corbin seat
Carbon fiber inserts and Air box covers
Harri's C/F hugger
Rizoma Front caliper guards (1 of 2 in the USA)
R1 Mirrors with convex glass
Anodized matching sliders
Custom Paint with airbrushed graphics.

All Rizoma, MIVV and Fabbri parts courtesy of PJ's Parts PJ's Parts - Accessories For Every Bike And Rider

Love' em all and the customer service is way beyond expectation.

wraith1027 · 03-05-2008, 04:29 PM

untitled2.bmp

bugeater · 03-10-2008, 02:32 PM

Where did you get those sliders?

wraith1027 · 03-17-2008, 11:27 AM

Got them on E-bay on close out. Manufacturer was closing the doors. To be honest, I can't remember the name but I will look tonight and post up.

petefz · 03-26-2008, 05:41 AM

MIVV X-Cone from PJ
Drag bars
R6 Mirrors
DG8 Gear indicator

pruette850 · 07-17-2008, 01:15 PM

What mods need to be done to replace fz1 mirrors w/r1 mirrors and are your bars clipons, if so any rubbing or problems?

noahfz1 · 07-23-2008, 08:27 PM

Pruette make your way over to the Florida section if get a chance. We have a very active board going on there. Alot of rides to join in on.

wraith1027 · 07-30-2008, 02:03 PM

Quote:

Originally Posted by pruette850

What mods need to be done to replace fz1 mirrors w/r1 mirrors and are your bars clipons, if so any rubbing or problems?

The R1 mirrirs bolt up. no mods needed. The stud bolts are slightly shorter than the FZ1 bolts, but they still fit. No clip ons. I have Rizoma bars mounted on a GYT-R riser that lowers the bars approx. 1 inch. No rubbing.

michael2008 · 10-16-2008, 01:35 AM

The Yamaha FZ1 is a street motorcycle manufactured by the Yamaha Motor Company Ltd. of Japan. Yamaha also produces a smaller, similar 600cc version of this motorcycle called the FZ6.
___________________________________________________________________
Michael
Our mission is to provide high quality end to end solutions to the BPO segment in a manner that will improve the operational efficiency while reducing the cost of the services to the client.
4thdimension1@gmail.com