1. Turn the ignition switch ON
2. Press the right control button (2) while pressing the left control button (3) The minute display will start flashing.
3. Set hour and minute. The clock will alternate between the hour and minute adjust modes each time the left control button is pressed.
To set the hour, select the hour adjust mode and press the right control button.
To set the minute, select the minute adjust mode and press the right control button until the desired minute is displayed the minute display will return to " 00" when "60" is reached without affecting the hour display.
4.Wait approximately 10 seconds: the display will stop flashing automatically. Adjustment will be cancelled when the ignition is turned OFF while the clock is in adjust mode.
I got this right out of the owners manual hope this helps.
|
setting the clock
Linear Mode
