f4i frame sliders size ?

BlazenFire · 07-02-2004, 09:31 PM

I just received a set of delrin frame sliders that I bought off of ebay. And I got 2 of different sizes, with one of them being longer than the other. Both of them have the same radius. Its only the length that differs. Have I been shipped wrong ones or what ?

Makaveli · 07-02-2004, 09:45 PM

hey I really dig your bike, what kind of can is that? A Micron?

BlazenFire · 07-02-2004, 10:05 PM

Yep, its a micron.

Pineapple Devil · 07-03-2004, 02:18 AM

one is supposed to be longer than the other. correct me if i'm wrong, but i think the left one is the one that has the longer side

cookhj · 07-03-2004, 10:24 AM

are they the ones that you have to modify the fairing, or are they just the bolt on ones?

BlazenFire · 07-03-2004, 05:25 PM

i have to cut the fairing.

Chase9119 · 07-13-2004, 09:38 PM

I'll check when I get home but I do believe the left slider is the longer of the 2.

Do you have the know hows to cut the fairing? I can give ya a quick write up if you want. (I've got 8 fairing cuts *4 bikes* under my belt, I have it down to a science)
Also check out your local Office Depot & pick up some counter top plugs.?. the inserts they put on counter tops to run the wire through. Pick up two 2 inch diameter plugs to clean up the cut area.

Soj · 08-18-2004, 05:29 PM

Quote:

Originally Posted by BlazenFire

i have to cut the fairing.

I just purchased a pair of those (2 different lengths) from eBay too - it would help if they sent instructions with them!

I have decided not to use these ones because of the hassle cutting the fairings, and have purchased another pair that bolts on to the outside of the fairing...see pic.

Soj

WheelieboyChris · 08-18-2004, 06:07 PM

The right one is the longer one. I'm 100% positive because I just went out to the garage and checked for you.