[rsw81]

Now that you have successfully created your FZ6 projector retrofit, it's time to put it on the bike. This is a relatively simple process and took me less than an hour. If you are careful, you don't even have to unhook any wires for the gauges or turn signals. First remove the inner fairings. By putting a towel on the front fender and gently lowering the entire front-fairing onto that nose-first, you should have enough slack in the wiring to negate disconnecting them. There are 5 screws holding the headlight housing to the front-fairing, one at each corner and one hiding at the top in the center behind the gauges. There are also 4 screws mounting the whole thing to the frame.

Here are some pics of the front disassembled and the two headlights side-by-side.