Step 6: Now that all of the moving parts are mounted into the back-half of the headlight housing. You want to gently press the front-half of the headlight housing onto the back-half, only enough to get it roughly lined up. Pre-Heat the oven to 350F again. Turn oven OFF and place headlight into oven on cool cookie-sheet for 10 minutes. Remove prompty and press the two halves together, carefully making sure all retaining tabs click into place. I used clamps to hold the two halves together while the silicon hardens.
__________________
Sweat wipes off, road rash doesn't. Gear up.
2006 Blue Yamaha FZ6
http://profile.myspace.com/index.cfm...endid=26329818
Chocolate lovers make better lovers.
Mods: R6 Projector Headlight Retrofit, dual 4300k HID Conversion XenonDepot, 2 Bros Exhaust, FAZR6 FE, Uncaged Frame Sliders
|