[rsw81]

Step 5: Once the paint dries, it is time to put everything back together. I did one last test fit before final assembly to be sure nothing moved around. Now that I am sure it is all correct, I used threadlocker on the two screws that mount the brackets to the projectors. This stuff takes about 24 hours to cure, so you have plenty of time to get this moved around and mounted before worrying about this. Once the two brackets are mounted onto the projector, but before the threadlock dries, get the whole thing into the headlight housing with the plastic nuts onto the adjusting bolts. While you are doing this, try to get the projector aimed as close to where you want it as you can. Really this is just guessing because you'll need to adjust this later for fine tuning.