Woot! Headlight job completed!!
Here are some of the details:
The FZ1N kit comes with a bracket as I've said before, but it does not fit natively with the FZ6 so it needs some modifications. Pics below show the following... A piece of the bracket needs to be removed because the FZ ignition assembly interferes... I picked up a pair of fork mounts to support the FZ1N bracket, but had to cut the arms down and drill a new hole... The lower part of the FZ1N bracket needs and additional cross piece to mount to the fizzer frame where the front brake line is secured. I added rubber spacers to push the bottom of the bracket away from the frame, otherwise there is some interference.