Here are my notes and some of the things I did. I have other pics if you need for refs.
Parts ordered
Dual headlight kit from aztec8.com w/ mini std signal $241
Pro taper handlebars from local Yamaha $70
Left and right mirrors from classiccycleparts.com $42 for both
Mirror brackes from flynclycle.com $23 for 2
Clutch lever from local Suzuki $25 from sv650 Thanks Tivom!
30x 18-22 ga solderless crimp connectors (red ones from fry’s) $2
4x 18-22 ga solderless m/f connectors (red ones from fry’s) $2
3/8 and ½ inch shrink tube about a foot of each (from fry’s) $4
¾ inch wire cover plastic tube (from fry’s) $4
2x 10mmx1.5x16 hex head bolts (from ace hardware) $1.50
1x aluminum channel ½ x ¾ (from ace hardware) $9
2 rubber grommets (from ace hardware) $1
black paint $5.50
total parts/etc $430
stocked with zip ties and hand tools= no cost
Translated wiring diagram for splicing in new headlight and signals
Black green wire lo beam
Black yellow high beam
Black common ground and you will see all the other grounds crimped to this
Front R signal green : black ground : omit blue red (for running light)
Front L signal brown : black ground : omit blue (for running light)