Quote:
|
Originally Posted by nasaman
+1 for the photos & step-by-step comments, Eviloliv3! Let me just add just a couple of comments: 1) You may find it easier to slide a 1ft or so pipe or hollow jack handle over the allen wrench for added leverage; 2) I called Uncaged Cycles to ask whether any type of thread lock is needed --they said "no" -- just tighten the bolts to spec (as you said).
|
+1 on the nice procedure with pics.
My comment: Be careful when putting a pipe, or "cheater" bar over the allen wrench. You'll strip those threads out faster than you can say butter! If your not using a torque wrench, go easy on them. Remember, the threads are aluminum.