Sportbikes.net - View Single Post

nasaman · 02-02-2007, 03:02 PM

+1 for the photos & step-by-step comments, Eviloliv3! Let me just add just a couple of comments: 1) You may find it easier to slide a 1ft or so pipe or hollow jack handle over the allen wrench for added leverage; 2) I called Uncaged Cycles to ask whether any type of thread lock is needed --they said "no" -- just tighten the bolts to spec (as you said).

02-02-2007, 03:02 PM	#4 (permalink)
nasaman "NASA BIKE" Owner Join Date: Jun 2006 Location: DeBary, FL Posts: 1,359 Casino Cash: $350 Sportbike: "Yamaha Beemer" Liquid Silver 2K4 FZ6	Great Job! +1 for the photos & step-by-step comments, Eviloliv3! Let me just add just a couple of comments: 1) You may find it easier to slide a 1ft or so pipe or hollow jack handle over the allen wrench for added leverage; 2) I called Uncaged Cycles to ask whether any type of thread lock is needed --they said "no" -- just tighten the bolts to spec (as you said). __________________ [I have absolutely NO affiliation of any kind, formal or informal, and I am not compensated in any way by any manufacturers or vendors of products that I may recommend (or criticize) in my posts here at SBN.] HEY, IS THAT A BEEMER? ....NO, ACTUALLY IT'S WAY BETTER THAN A BEEMER!!! HERE'S THE DEAL: FLAUNTS PRESTIGE ....BUT DELIVERS PERFECTION!!!