well, you'll need to drill the 3 rivits from the end cap, get the end cap off scrape all the epoxy/sealent that you will see when the cap is off, unbolt the whole thing from the bike, pound on the studs in which it bolts to the pipe section with, use a rubber or plastic hammer, when you have hammered the studs all the way in, or as far as they will go, put some kind of long handle on the ground and put the end of it into the front of the muffler (where the studs are) bang on it till the whole insides come out, then cut however much of the baffling out that you want, if you just want to remove all the packing? thats cool, be creative. i wish i would have taken pics...sorry guys
|