[GIXXERGUY]

here we go I just sold my crf50 and bought me a 01 f4i with 1266 miles on it, bank repo. bike sat for 5 or 6 months, we put a battery in it and it won't fire, don't hear the fuel pump priming up? so we spray ether in to see if it will fire, yup getting spark, runs on ether and dies after it's all gone lol.

wire the fuel pump direct with a jumper to the battery and it primes but still don't get fuel to throttle bodies to start her up.

my question is what in this bikes system will allow this thing not to get fuel and fire? could it be that the fuel pump is just weak and on the verge of taking a poo, or wut, but it still don't explain why the fuel pump didn't prime with the regular wiring on keyon, but it did when we jumped to the battery!

is there a fuel relay? fuse? I checked all fuses and they are all good. all wires plugged in, it don't have plastics on it but the gauges are there and the tip over sensor is still there and plugged in, enough fuel in tank............


I would be greatly appreciated if anyone with knowledge of this problem or these bikes information would be awesome.

P.S. if anyone has the diagnostic codes I am going to try to pull them as well.

THANKS IN ADVANCE.

Ron